Quizzes & Surveys Archive - Safety Pod International

Welcome to your Evaluation Assessment

Please click Start Assessment to begin

Please answer the following series of multiple choice questions. On completion your answers will be scored and the results presented..

1.

What should be carried out firstly before filling a safety pod in any area?

select 1 answer

A check of Electricity Points

Environmental risk assessment

A check of the machine

Filling of a ridged container for the polystyrene filler

1 out of 9

2.

What is required in order to obtain information on how to maintain the Safety Pod?

select 1 answer

Maintenance Guide/ Manual of Guidance

Filling Machine Manual

Specification Sheet

Shipping Documents

2 out of 9

3.

How much filler is required to fill a Standard size Safety Pod?

select 1 answer

8 Cubic Feet

35 Cubic Feet

48 Cubic Feet

64 Cubic Feet

3 out of 9

4.

What tension do the valve screws need to be set at for a secure closure?

select 1 answer

2.4 newton metres

6.8 newton metres

1.30 newton metres

10.3 newton metres

4 out of 9

5.

Select 4 components of the filling kit.

select 4 answers

Inlet Port

Outlet Duct

Wood Screws

Torque Screwdriver

Heating Duct

Extension Bit

5 out of 9

6.

If you suspect a machine blockage which two of the following options could be carried out?

select 2 answers

Stop sending filler through the pipe

Reverse the pipes

Continue to fill

Turn machine off

6 out of 9

7.

Select 3 recommended items of PPE that should be used whilst filling a Safety Pod.

select 3 answers

Ear Plugs

Safety Goggles/Glasses

Gloves

Face Mask

7 out of 9

8.

What must you never do when the machine is plugged into a power source?

select 1 answer

Fill the ducting

Empty the ducting

Look into the filling port

Hold the ducting

8 out of 9

9.

In the event of overfilling the Safety Pod what options are available to empty the contents?

select 2 answers

To let the polystyrene filler fall out of the valve freely into a container

Continue to fill

Use the inlet ducting to remove filler from the valve place outlet ducting into the Nylon bag provided, remove in short bursts

Place the outlet ducting in the valve

9 out of 9